Huawei B683 Port Forward License The Said

Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.

The following procedure describes how to use a computer running Windows XP and Internet Explorer 7.0 to log in to the web management page of the CPE.

To ensure your data safety, it is recommended that you turn on the firewall, and conserve your login, WiFi and FTP password carefully.

End Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Choose Home Overview.

In the LAN Usage area, view the following information.

After the configurations are complete, the CPE can access the Internet.

To perform an online upgrade, perform the following steps: Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Choose Home Update.

Click CWMP Update.

You can connect or Manual disconnect the CPE to or from the Internet manually.

Click Submit. ----End Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Choose Internet PIN Management.

View the status of the USIM card in the USIM card status field.

Set Internet MTU to a value in the range of 1280 to 1500.

This IP address must be different from the IP address set on the LAN Host Settings Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

Choose LAN DHCP Settings.

Click Edit List. 3.

Click Delete All.

Click OK. ----End Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WPA encryption This value can be set to TKIPAES, AES, or TKIP.

Click Edit MAC List.

Click Add. 4. Set MAC address.

To configure Wi-Fi WPS settings, perform the following steps: 1.

Choose Wi-Fi WPS Settings.

Set WPS Mode. Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

If Password length is set to 128-bit, the 128-bit encryption key must contain 13 ASCII characters or 26 hex characters.